Welcome to our store! প্রিয় সম্মানিত গ্রাহক, আমাদের সাথে থাকার জন্য ধন্যবাদ। ওয়েবসাইট আপডেটের কারণে কিছু পণ্য এখনো যুক্ত হয়নি। কাঙ্ক্ষিত পণ্য না পেলে বা তথ্য জানতে আমাদের মেসেজ করুন। 📱 WhatsApp: +8801812033544
INF-146003 14.6V 3A 45W LiFePO4 battery charger with DC barrel connector
INF-146003 14.6V 3A 45W LiFePO4 battery charger with DC barrel connector

INF-146003 14.6V 3A LiFePO4 Battery Charger 45W for 4S 12.8V Lithium Iron Phosphate Battery Packs

0 out of 5 (0 reviews)
৳320.00
In Stock (10 available)

The INF-146003 14.6V 3A LiFePO4 Battery Charger is a dedicated AC-powered charger designed for charging compatible 4S 12.8V Lithium Iron Phosphate (LiFePO4) battery packs. With a regulated 14.6V output and 3A charging current, it is suitable for rechargeable LiFePO4 battery applications requiring a higher-current desktop or wall-plug charging solution. A four-cell LiFePO4 pack has a nominal voltage around 12.8V, while 14.6V corresponds to approximately 3.65V per cell at full charge.

The charger shown is marked INF-146003 and has a rated output of 14.6V DC, 3A, 45W. The input rating shown on the product label is 100–240V AC, 50/60Hz, 0.6A, making it suitable for standard AC mains supplies within that voltage range. The attached charger uses a two-pin AC plug and a DC barrel-style output connector.

This 14.6V 3A LiFePO4 charger is useful for students, electronics engineers, makers, technicians, robotics projects, backup-power systems, portable electronics, DIY battery packs, and other applications using a compatible 4S LiFePO4 battery configuration. Texas Instruments documentation confirms that LiFePO4 charging uses a constant-current/constant-voltage approach, with the charger transitioning to constant-voltage regulation as the battery approaches its charging voltage.

The 14.6V charging voltage is particularly relevant to 4S LiFePO4 battery packs, where four cells are connected in series. Battery University lists 14.6V as the maximum charging voltage for a 12.8V, four-cell LiFePO4 system.

The 3A charging capability can provide substantially faster charging than low-current LiFePO4 chargers, although the appropriate charging current depends on the battery manufacturer's specifications and capacity. For example, a battery manufacturer may specify a lower maximum charging current than 3A. Always check the battery pack's BMS and charging-current specifications before connecting the charger.

This charger should not be treated as a universal 14.6V power adapter. It should only be used with batteries and charging systems specifically designed for its output voltage and charging characteristics. A compatible 4S LiFePO4 battery pack with an appropriate BMS is recommended. LiFePO4 batteries should not be continuously maintained at a high charging voltage like a conventional lead-acid float system.

For electronics hobbyists and professionals in Bangladesh, the 14.6V 3A LiFePO4 Battery Charger can be useful for DIY battery packs, solar-energy projects, portable power systems, robotics, IoT equipment, emergency backup systems, and other 12.8V LiFePO4-powered projects.

Important: Verify the battery chemistry, cell configuration, connector polarity, battery capacity, and BMS requirements before use. The product image label also identifies the unit as a Li-ion battery charger, so the seller/manufacturer's exact chemistry compatibility should be confirmed before using it specifically with LiFePO4 batteries.

Specifications:

SpecificationDetails
Product TypeLiFePO4 Battery Charger
ModelINF-146003
Output Voltage14.6V DC
Output Current3A
Output Power45W
Recommended Battery4S 12.8V LiFePO4
Battery ChemistryLithium Iron Phosphate
Input Voltage100–240V AC
Input Frequency50/60Hz
Input Current0.6A
Charging MethodCC/CV type charging
ConnectorDC barrel-style plug
AC Plug2-pin
Application12.8V LiFePO4 battery packs
Model MarkingINF-146003
Country MarkingMade in China
Frequently Asked Questions

A 14.6V charger is generally intended for a 4S LiFePO4 battery pack with a nominal voltage of 12.8V, provided the battery manufacturer's charging requirements match.

A typical LiFePO4 cell reaches approximately 3.6–3.65V at full charge. Four cells in series therefore require approximately 14.4–14.6V for the charging stage.

The 3A rating represents the charger's maximum rated charging current. The actual current can decrease as the battery approaches full charge during the constant-voltage stage.

No. A LiFePO4 charger should not be selected simply because both batteries are commonly described as 12V batteries. Their charging characteristics differ, and LiFePO4 systems require appropriate charging control.

No. Check that the battery is a 4S 12.8V LiFePO4 pack, supports the charging voltage/current, and has the appropriate BMS and connector polarity.

It may be suitable if the battery manufacturer permits a 3A charging current. Always check the battery's specified maximum charge current before use.

The rated output is 14.6V × 3A = 43.8W, commonly marketed as approximately 45W.
Buy Now

Related Products