Welcome to our store! প্রিয় সম্মানিত গ্রাহক, আমাদের সাথে থাকার জন্য ধন্যবাদ। ওয়েবসাইট আপডেটের কারণে কিছু পণ্য এখনো যুক্ত হয়নি। কাঙ্ক্ষিত পণ্য না পেলে বা তথ্য জানতে আমাদের মেসেজ করুন। 📱 WhatsApp: +8801812033544
4S 12.8V 30A LiFePO4 BMS Battery Charge Protection Board with Balance for 4 Cell LiFePO4 Battery Pack
4S 12.8V 30A LiFePO4 BMS Battery Charge Protection Board with Balance for 4 Cell LiFePO4 Battery Pack

4S 12.8V 30A LiFePO4 BMS with Balance for DIY Battery Packs

0 out of 5 (0 reviews)
৳300.00
In Stock (10 available)

The 4S 12.8V 30A LiFePO4 BMS Battery Charge Protection Board with Balance is a battery management and protection module designed for 4-cell LiFePO4 battery packs. It is suitable for building a nominal 12.8V LiFePO4 battery pack using four 3.2V LiFePO4 cells connected in series. The BMS helps protect the battery pack during charging and discharging while providing cell balancing functionality.

This 4S LiFePO4 BMS board is a practical choice for students, electronics engineers, technicians, makers and DIY enthusiasts working on battery-powered projects. It can be used in applications such as DIY LiFePO4 battery packs, solar energy storage, UPS systems, inverters, portable power supplies, robotics, IoT projects and other electronic equipment.

The board supports a 30A current rating, making it suitable for many medium-power 12.8V battery applications. Its protection functions are designed to help reduce the risk of battery damage caused by conditions such as overcharging, over-discharging, excessive current and short circuits.

One of the important features of this module is its cell balancing function. In a 4S battery pack, individual cells can gradually develop differences in voltage. The balancing circuit helps maintain better voltage consistency between the connected cells, which can contribute to more stable battery-pack operation and better utilization of the available capacity.

For a 4S LiFePO4 battery configuration, four individual 3.2V LiFePO4 cells are connected in series to create a nominal 12.8V battery pack. A suitable LiFePO4 charger should be used for charging the completed pack. For a typical 4S LiFePO4 configuration, the full-charge voltage is approximately 14.6V, but users should always verify the exact specifications of the particular BMS and battery cells before installation.

The 12.8V 30A LiFePO4 BMS is especially useful for DIY battery builders who need a compact protection board rather than a complete battery charger. It does not replace a proper LiFePO4 charger. Correct wiring and appropriate cells are essential for safe operation.

Whether you are designing a solar battery backup, DIY UPS battery, portable power station, robotics project or custom LiFePO4 battery pack, this 4S BMS provides an economical solution for battery protection and balancing.

Specifications:

SpecificationDetails
Product TypeLiFePO4 BMS Protection Board
Configuration4S
Nominal Battery Voltage12.8V
Battery ChemistryLiFePO4 / Lithium Iron Phosphate
Cell Configuration4 × 3.2V cells in series
Current Rating30A
Cell BalancingYes
Overcharge ProtectionYes
Over-discharge ProtectionYes
Over-current ProtectionYes
Short-circuit ProtectionYes
Typical Full Charge Voltage14.6V for 4S LiFePO4
ApplicationsDIY Battery Pack, Solar, UPS, Inverter, Robotics, Portable Power

Main Features:

  • 4S 12.8V LiFePO4 battery pack support
  • 30A current-rated BMS
  • Built-in cell balancing function
  • Overcharge protection
  • Over-discharge protection
  • Over-current protection
  • Short-circuit protection
  • Suitable for DIY and electronics projects
  • Compact battery management solution
  • Designed specifically for LiFePO4 cells

Applications:

  • 12.8V LiFePO4 battery packs
  • Solar energy storage systems
  • DIY UPS battery packs
  • Inverter battery systems
  • Portable power stations
  • Robotics projects
  • IoT power systems
  • DIY electronics projects
  • Backup power systems
Frequently Asked Questions

A 4S 12.8V LiFePO4 BMS is a battery management and protection board designed for four 3.2V LiFePO4 cells connected in series.

This BMS is designed for LiFePO4 batteries, not standard 3.7V lithium-ion cells such as typical NMC or NCA cells.
Buy Now

Related Products