AMS1117-3.3V 1A Voltage Regulator IC
The AMS1117-3.3V 1A Voltage Regulator IC is a fixed-output linear voltage regulator designed to provide a stable 3.3V DC output from a higher input voltage. It is widely used in electronics projects, embedded systems, microcontroller circuits, Arduino projects, sensor modules, development boards, and DIY power-supply applications.
With a nominal 3.3V regulated output and up to 1A output-current capability under suitable thermal conditions, the AMS1117-3.3V is a convenient solution when a simple 3.3V linear power supply is required. Its compact package makes it suitable for PCB designs where space is limited.
For Bangladeshi students, hobbyists, engineers, makers, and electronics technicians, this IC is useful for converting suitable higher DC voltages into a regulated 3.3V rail for circuits that require a stable low-voltage supply.
Features:
- IC: AMS1117-3.3V
- Output voltage: 3.3V DC fixed
- Output current: Up to 1A, subject to thermal and operating conditions
- Type: Linear voltage regulator
- Output: Fixed 3.3V
- Low-cost solution for basic 3.3V regulation
- Suitable for microcontroller and embedded circuits
- Useful for Arduino, ESP, STM32, sensor and IoT projects
- Compact SOT-223-style package commonly used for AMS1117 devices
- Requires appropriate input/output capacitors for stable operation
- Commonly available for DIY electronics and PCB projects
Specifications:
| Specification | Details |
|---|---|
| Part Number | AMS1117-3.3V |
| Device Type | Linear Voltage Regulator |
| Output Voltage | 3.3V |
| Maximum Rated Output Current | Up to 1A* |
| Input Voltage | Higher than 3.3V; keep within the specific manufacturer's rating |
| Output Type | Fixed |
| Regulation Type | Linear |
| Package | SOT-223 / equivalent, depending on manufacturer |
| Output Polarity | Positive |
| Typical Applications | MCU, sensors, IoT, embedded systems, PCB power supplies |
| Mounting | SMD |
*The actual usable current depends heavily on input voltage, PCB copper area, heatsinking, ambient temperature, and thermal dissipation. A linear regulator dissipates approximately (VIN − 3.3V) × IOUT as heat.
Important Power-Dissipation Example
If the input is 5V and the load is 500mA:
Power dissipation = (5V − 3.3V) × 0.5A = 0.85W
That amount of heat may require good PCB copper/thermal management. Using a much higher input voltage at high current can make an AMS1117 unsuitable because of excessive heat.
AMS1117-3.3V Pinout
For the common SOT-223 AMS1117 package, the typical pin configuration is:
| Pin | Function |
|---|---|
| Pin 1 | GND |
| Pin 2 | Output |
| Pin 3 | Input |