Welcome to our store! প্রিয় সম্মানিত গ্রাহক, আমাদের সাথে থাকার জন্য ধন্যবাদ। ওয়েবসাইট আপডেটের কারণে কিছু পণ্য এখনো যুক্ত হয়নি। কাঙ্ক্ষিত পণ্য না পেলে বা তথ্য জানতে আমাদের মেসেজ করুন। 📱 WhatsApp: +8801812033544
DP83848 Ethernet Board Module 10/100Mbps LAN PHY
DP83848 Ethernet Board Module 10/100Mbps LAN PHY

DP83848 Ethernet Board Module 10/100Mbps LAN PHY Network Interface Module

0 out of 5 (0 reviews)
৳880.00
In Stock (6 available)

The DP83848 Ethernet Board Module is a compact Ethernet PHY network interface module based on the Texas Instruments DP83848 Ethernet physical-layer transceiver. It is designed to provide 10BASE-T and 100BASE-TX Ethernet connectivity to embedded systems, microcontrollers, development boards, industrial controllers, and network-enabled electronics projects.

The DP83848 is widely used in embedded Ethernet applications because it provides the physical interface between a microcontroller or processor with an Ethernet MAC and a standard Ethernet network. This module makes it easier to integrate wired LAN connectivity into development projects without designing the complete PHY section from scratch.

For Bangladeshi electronics students, engineers, embedded developers, and technology enthusiasts, the DP83848 Ethernet module is useful for experimenting with wired networking, TCP/IP communication, IoT devices, industrial monitoring, remote control systems, Ethernet data acquisition, and embedded web servers.

The module typically connects to an MCU or processor through an MII or RMII Ethernet interface, depending on the specific board implementation. On the network side, the PHY connects to an Ethernet connector such as an RJ45 interface, allowing the embedded system to communicate with standard Ethernet networks.

The DP83848 Ethernet PHY supports both 10 Mbps and 100 Mbps Ethernet communication, making it suitable for many embedded networking applications where reliable wired connectivity is preferred over wireless communication. Wired Ethernet can provide stable network communication, low latency, and predictable connectivity for industrial and development environments.

This Ethernet board module can be used with suitable microcontrollers and development platforms that provide an Ethernet MAC interface. It is particularly useful for projects involving STM32, NXP, TI and other Ethernet-capable microcontrollers, provided that the electrical interface, voltage levels, clock requirements, and software support are compatible with the selected MCU.

Typical applications include embedded web servers, industrial automation, Ethernet-to-MCU interfaces, IoT gateways, network monitoring devices, smart controllers, data acquisition systems, robotics, automation projects, and laboratory networking experiments.

When using the DP83848 module, developers should check the exact board schematic and documentation because module implementations can differ in pinout, power supply, oscillator/clock configuration, RJ45 magnetics, LED connections, and MII/RMII configuration. The DP83848 itself is the Ethernet PHY, while the host microcontroller normally provides the Ethernet MAC and higher-level networking functions.

For reliable operation, use the module with the correct power supply and interface configuration recommended for the specific board. Software support will depend on the host microcontroller, Ethernet MAC peripheral, PHY driver, and networking stack being used.

Key Specifications

SpecificationDetails
Module NameDP83848 Ethernet Board Module
Main ICDP83848 Ethernet PHY
InterfaceMII / RMII, depending on module
Ethernet Speed10/100 Mbps
Ethernet Standards10BASE-T / 100BASE-TX
Network TypeWired Ethernet / LAN
Network ConnectorTypically RJ45, module dependent
PHY TypeEthernet Physical Layer Transceiver
Host InterfaceMCU/Processor Ethernet MAC
ApplicationsIoT, Embedded Ethernet, Industrial Automation, Networking
Frequently Asked Questions

The DP83848 Ethernet Board Module is an Ethernet PHY interface board based on the DP83848 Ethernet physical-layer transceiver. It allows a compatible microcontroller or processor with an Ethernet MAC to communicate over a wired Ethernet network.

The DP83848 supports 10 Mbps and 100 Mbps Ethernet, including 10BASE-T and 100BASE-TX operation.

The MAC handles Ethernet data-link functions inside the microcontroller or processor, while the PHY converts the digital Ethernet interface into the electrical signals required for physical network communication. The DP83848 provides the PHY function.

Yes. It is suitable for IoT projects that require reliable wired Ethernet connectivity, including network monitoring, industrial IoT, remote control and embedded web server applications.

Common applications include embedded Ethernet, STM32 networking, industrial automation, IoT gateways, networked controllers, data acquisition systems, robotics, remote monitoring and embedded web servers.
Buy Now
Download PDF

Related Products