FNIRSI 2C53T 50MHz 250MS/s 3-in-1 Handheld Oscilloscope, DMM & Signal Generator
The FNIRSI 2C53T is a compact 3-in-1 electronic test instrument that combines a 50MHz dual-channel digital oscilloscope, 4.5-digit multimeter and DDS signal generator in one portable handheld device. It offers a 250MS/s sampling rate, 50MHz oscilloscope bandwidth, FFT and math functions, cursor measurements, XY mode and waveform screenshot storage.
For Bangladeshi electronics students, engineers, technicians, makers and hobbyists, the 2C53T can reduce the need to carry separate instruments when working on Arduino, ESP32, STM32, Raspberry Pi, power supply, amplifier, sensor and general electronics projects.
The built-in signal generator provides 13 waveform types with adjustable frequency, amplitude and duty cycle, while the multimeter supports AC/DC voltage and current, resistance, capacitance, diode, continuity and temperature measurements.
The FNIRSI 2C53T 3-in-1 Oscilloscope Multimeter Signal Generator is designed for electronics troubleshooting, circuit development, laboratory learning, repair work and field testing.
Its oscilloscope section provides two independent channels, 50MHz analog bandwidth and 250MS/s real-time sampling, with a 10ns to 20s time-base range and 10mV/div to 10V/div vertical sensitivity. It also includes AUTO, Normal and Single trigger modes, AC/DC coupling, XY and rolling display modes, waveform persistence, eight basic math operations and FFT.
The integrated DMM provides 4.5-digit, 19,999-count measurement capability and supports voltage, current, resistance, capacitance, temperature, diode and continuity testing. Depending on the measurement function, its ranges extend to 1000V DC, 750V AC and 9.999A AC/DC.
For signal testing and circuit experiments, the built-in DDS signal generator offers 13 waveform types and a frequency range up to 50kHz, with adjustable amplitude and duty cycle.
The 2.8-inch 320×240 color display, rechargeable 3000mAh battery and USB Type-C charging make the instrument convenient for a workbench, classroom, repair shop or field service environment. The listed dimensions are 167 × 89 × 35mm and weight is approximately 300g.
Important practical note
The 2C53T is best viewed as a versatile portable electronics test instrument rather than a replacement for a high-end laboratory oscilloscope. Community reports have pointed out limitations in the built-in signal generator and waveform quality at some settings, so users working on demanding high-frequency or precision applications should verify signals with appropriate laboratory equipment.
Features:
- 3-in-1 handheld instrument
- Dual-channel digital oscilloscope
- 50MHz analog bandwidth
- 250MS/s real-time sampling rate
- 50MHz bandwidth on both oscilloscope channels
- 4.5-digit / 19,999-count digital multimeter
- DDS signal generator
- Up to 50kHz signal-generator frequency
- 13 signal waveform types
- Adjustable signal-generator frequency, amplitude and duty cycle
- FFT analysis
- 8 basic oscilloscope math operations
- Cursor measurement
- XY display mode
- Rolling waveform display
- Persistence mode
- Waveform screenshot saving
- USB Type-C charging
- 3000mAh rechargeable battery
- 2.8-inch 320 × 240 color display
- Compact 300g handheld design
- Chinese and English language support
Specifications:
Oscilloscope Specifications
| Specification | FNIRSI 2C53T |
|---|---|
| Oscilloscope Channels | 2 independent channels |
| Analog Bandwidth | 50MHz |
| Sampling Rate | 250MS/s |
| Storage Depth | 1Kpts |
| Input Impedance | 1MΩ |
| Time Base | 10ns to 20s |
| Vertical Sensitivity | 10mV/div to 10V/div, X1 |
| Maximum Measured Voltage | ±400V |
| Trigger Modes | Auto / Normal / Single |
| Trigger Types | Rising Edge / Falling Edge |
| Display Modes | Y-T / Rolling / X-Y |
| Coupling | AC / DC |
| Persistence | OFF / 500ms / 1s / ∞ |
| Math | 8 basic operations + FFT |
| Cursor Measurement | Yes |
| Waveform Screenshot | Yes |
| Waveform Image Export | Supported |
Specifications are based on published 2C53T documentation and product specifications.
Digital Multimeter Specifications:
| Measurement | Range |
| DC Voltage | Up to 1000V |
| AC Voltage | Up to 750V |
| DC Current | Up to 9.999A |
| AC Current | Up to 9.999A |
| Resistance | Up to 19.999MΩ |
| Capacitance | Up to 99.99mF |
| Temperature | -55°C to 1300°C |
| Diode Test | Yes |
| Continuity Test | Yes |
| Display | 4.5-digit / 19,999 counts |
The exact accuracy varies according to the selected measurement range and function.
Signal Generator Specifications:
| Specification | Details |
| Generator Type | DDS |
| Channels | 1 |
| Maximum Frequency | 50kHz |
| Frequency Step | 1Hz |
| Amplitude | Up to 3V |
| Duty Cycle | Adjustable |
| Waveforms | 13 types |
Published documentation lists 13 waveform types including sine, rectangular, sawtooth, half-wave, full-wave, step, exponential, DC, multi-audio, pulse and Lorentz waveforms.
General Specifications:
| Specification | Details |
| Display | 2.8-inch HD Color LCD |
| Resolution | 320 × 240 |
| Battery | 3000mAh Lithium |
| Charging | USB Type-C, 5V/1A |
| Approx. Standby Time | Up to 6 hours |
| Dimensions | 167 × 89 × 35mm |
| Weight | Approx. 300g |
| Languages | Chinese / English |
| Functions | Oscilloscope + DMM + Signal Generator |
Why Choose FNIRSI 2C53T?
The main advantage of the FNIRSI 2C53T is its combination of three frequently used electronics instruments in one handheld device.
Instead of carrying a separate oscilloscope, multimeter and basic function generator, users can use one compact unit for many everyday electronics tasks. This is particularly useful for students, repair technicians, hobbyists and engineers who work in different locations.