Welcome to our store! প্রিয় সম্মানিত গ্রাহক, আমাদের সাথে থাকার জন্য ধন্যবাদ। ওয়েবসাইট আপডেটের কারণে কিছু পণ্য এখনো যুক্ত হয়নি। কাঙ্ক্ষিত পণ্য না পেলে বা তথ্য জানতে আমাদের মেসেজ করুন। 📱 WhatsApp: +8801812033544
INMP441 I2S MEMS microphone 24-bit omnidirectional digital audio module
INMP441 I2S MEMS microphone 24-bit omnidirectional digital audio module

INMP441 I2S MEMS Microphone 24-Bit Omnidirectional Digital Audio Sensor Module for ESP32, Arduino & Raspberry Pi

0 out of 5 (0 reviews)
৳250.00
In Stock (15 available)

The INMP441 I2S Microphone is a compact, low-power, digital-output MEMS microphone designed for high-quality voice and audio capture in embedded electronics projects. Manufactured by InvenSense, now part of TDK, the INMP441 combines a MEMS microphone element, signal conditioning, analog-to-digital conversion, filtering, power management, and a standard 24-bit I²S digital audio interface in a small package. This allows the microphone to send digital audio data directly to compatible microcontrollers, DSPs, and processors without requiring a separate external audio codec.

The INMP441 is an omnidirectional microphone, meaning it can capture sound from different directions rather than relying on a single narrow pickup direction. It is particularly suitable for near-field voice and audio applications where clear digital sound acquisition is required. The manufacturer specifies a typical 61 dBA signal-to-noise ratio (SNR) and -26 dBFS sensitivity, helping make the device useful for voice-controlled electronics, audio recording, speech-recognition projects, and smart-device applications. TDK Product Center

One of the main advantages of the INMP441 is its I²S interface. The digital audio connection uses SCK, WS, and SD signals. SCK provides the serial clock, WS provides word select or left/right channel timing, and SD carries the digital audio data. The L/R pin can be used to select the left or right audio channel, making the device useful when configuring more than one microphone on an I²S audio bus.

The microphone operates from a 1.8V to 3.3V supply, making it suitable for many modern low-voltage microcontroller platforms. Its original datasheet specifies a compact 4.72 × 3.76 × 1.00 mm surface-mount package, while commonly sold development modules place the microphone on a small breakout PCB with accessible connections for prototyping.

The INMP441 provides a specified frequency response beginning around 60 Hz, with the original datasheet specifying a flat response through approximately 15 kHz. Its typical current consumption is specified at around 1.4 mA in the original datasheet. TDK's current product information lists the device with a typical current consumption figure of 2.2 mA, so the exact specification should be checked against the particular device revision or module being supplied.

For Bangladeshi electronics students, engineers, makers, IoT developers, and hobbyists, the INMP441 is useful for projects involving ESP32 voice recognition, Raspberry Pi audio input, Arduino-compatible audio projects, smart speakers, voice assistants, sound monitoring, speech detection, home automation, robotics, and digital audio recording. Its direct digital I²S output can simplify audio acquisition compared with traditional analog microphone modules because the microphone performs the analog-to-digital conversion internally.

When designing an INMP441 circuit, use the correct supply voltage and connect the I²S signals according to the microcontroller's audio peripheral configuration. The microphone's CHIPEN input can be used to enable or disable the microphone, while the L/R input determines the selected channel. A local 0.1 µF decoupling capacitor is recommended between VDD and ground according to the datasheet.

The INMP441 is therefore a practical choice for compact digital voice and audio sensing projects, especially where an I²S-compatible microcontroller such as an ESP32 or another digital audio processor is being used.

Key Specifications

SpecificationDetails
Part NumberINMP441
Product TypeDigital MEMS Microphone
Manufacturer / BrandInvenSense / TDK
Microphone TypeOmnidirectional
Output InterfaceI²S Digital Audio
Audio Resolution24-bit
Supply Voltage1.8V to 3.3V
Typical SNR61 dBA
Sensitivity-26 dBFS ±3 dBFS
Frequency Response60 Hz to 15 kHz
Acoustic Overload Point120 dB SPL at 10% THD
Typical Current1.4 mA in original datasheet
Package Size4.72 × 3.76 × 1.00 mm
Port TypeBottom Port
Operating Temperature-40°C to +85°C
Interface PinsSCK, WS, SD, L/R, VDD, GND
ApplicationsIoT, mobile, wearable, drone, audio and voice projects

Specifications are based primarily on TDK/InvenSense documentation; module-level dimensions and pin arrangements can vary by breakout-board manufacturer.

INMP441 Pinout

PinFunction
VDD1.8V to 3.3V power input
GNDGround
SCKI²S serial clock
WSI²S word select / left-right clock
SDI²S serial data output
L/RLeft/right channel selection
CHIPENMicrophone enable / power-down control
Frequently Asked Questions

The INMP441 is a digital omnidirectional MEMS microphone with an I²S digital audio interface. It integrates the microphone, signal processing, ADC and digital interface into a compact device.

The INMP441 is a digital microphone. It outputs audio through an I²S interface rather than providing a conventional analog microphone output.

The INMP441 operates from approximately 1.8V to 3.3V.
Buy Now

Related Products