IR2103 Half-Bridge Gate Driver IC 600V High-Side & Low-Side MOSFET Driver PDIP-8
The IR2103 Half-Bridge Gate Driver IC is a high-voltage, high-speed MOSFET and IGBT driver designed for efficient power switching applications. Manufactured by International Rectifier (now part of Infineon Technologies), this dual-channel gate driver provides dedicated high-side and low-side gate drive outputs for controlling N-channel power MOSFETs and IGBTs in half-bridge configurations.
Operating with a gate drive supply voltage of 10V to 20V, the IR2103 supports high-side applications with a floating voltage capability of up to 600V. Its integrated high-voltage level-shifting technology allows the high-side output to operate with a switching node that moves significantly above ground potential. This makes it suitable for power electronics applications where reliable high-side and low-side switching control is required.
The IR2103 features two gate driver channels with typical peak output current capabilities of 210mA source and 360mA sink, depending on the specified test conditions. Its fast switching characteristics include approximately 100ns rise time and 50ns fall time under specified conditions. The device also provides matched propagation characteristics and internal deadtime to help prevent simultaneous conduction of the high-side and low-side MOSFETs.
One important feature of the IR2103 is its built-in cross-conduction prevention logic. This helps reduce the risk of shoot-through current in half-bridge switching circuits. Additionally, the integrated undervoltage lockout (UVLO) function helps protect the power switching system when the driver supply voltage falls below its operating threshold.
The IR2103 is compatible with 3.3V, 5V and 15V CMOS or LSTTL logic signals, making it useful for interfacing with microcontrollers, PWM controllers and digital control circuits. Its bootstrap-compatible floating high-side channel allows designers to drive high-side N-channel MOSFETs without requiring a separate isolated high-side power supply in suitable circuit configurations.
This gate driver IC is commonly used in half-bridge inverters, full-bridge converters, DC-DC converters, SMPS power supplies, motor control circuits, UPS systems, electronic power converters and industrial automation equipment. It can also be used in educational electronics laboratories and DIY power electronics projects for learning MOSFET switching, PWM control and high-voltage power conversion.
The PDIP-8 package is particularly convenient for electronics students, engineers and technicians in Bangladesh because it supports through-hole PCB assembly, prototyping and development using standard DIP IC sockets. The eight-pin configuration provides connections for the driver supply, high-side input, low-side input, common ground, high-side output, low-side output, floating supply and switching node.
When designing an IR2103-based circuit, appropriate bootstrap components, gate resistors, bypass capacitors and PCB layout techniques should be selected according to the application and manufacturer's datasheet. Correct deadtime configuration and adequate voltage protection are also important for reliable switching operation.
Whether you are developing a MOSFET-based inverter, designing an SMPS circuit, building a motor controller or experimenting with high-voltage switching electronics, the IR2103 Half-Bridge Gate Driver IC PDIP-8 provides an integrated solution for controlling high-side and low-side power semiconductor devices.
For Bangladeshi electronics students, engineers, makers and repair technicians, IR2103 is a useful component for practical power electronics development, inverter projects, switching power supplies and industrial electronic circuit design.
Technical Specifications
|
Parameter |
Specification |
|---|---|
|
Part Number |
IR2103 |
|
Manufacturer |
International Rectifier / Infineon |
|
IC Type |
Half-Bridge Gate Driver |
|
Number of Drivers |
2 |
|
Driver Configuration |
High-Side and Low-Side |
|
Maximum Floating Offset Voltage |
600V |
|
Gate Drive Supply Voltage |
10V–20V |
|
Peak Source Current |
210mA |
|
Peak Sink Current |
360mA |
|
Rise Time |
100ns |
|
Fall Time |
50ns |
|
Typical Turn-On Propagation Delay |
680ns |
|
Typical Turn-Off Propagation Delay |
150ns |
|
Logic Compatibility |
3.3V, 5V, 15V |
|
Protection Features |
UVLO, Cross-Conduction Prevention |
|
High-Side Operation |
Bootstrap Compatible |
|
Supported Switches |
N-Channel MOSFET and IGBT |
|
Package |
PDIP-8 |
|
Mounting Type |
Through-Hole |