IR2111 High Voltage Half-Bridge MOSFET & IGBT Gate Driver IC 600V 8-Pin PDIP
The IR2111 Half-Bridge Gate Driver IC is a high-voltage, high-speed driver designed to control power MOSFETs and IGBTs in half-bridge switching applications. Featuring high-side and low-side gate driver outputs, this IC simplifies power electronics circuit design and provides reliable gate control for high-voltage switching systems.
With a floating high-side channel supporting up to 600V, the IR2111 is suitable for bootstrap-based gate drive circuits. It operates with a gate drive supply voltage of 10V to 20V and includes internally set deadtime to help prevent shoot-through between high-side and low-side power switches.
The IR2111 integrates two gate driver channels in an 8-pin package, making it useful for inverter circuits, SMPS (Switched Mode Power Supply), DC-DC converters, motor controllers, electronic ballasts, and other power electronics applications.
For electronics students, engineers, and DIY electronics enthusiasts in Bangladesh, the IR2111 is a useful component for developing half-bridge inverter circuits, MOSFET switching projects, and IGBT-based power control systems.
The IC features CMOS-compatible logic inputs, undervoltage lockout protection for both channels, matched propagation delays, and high-side floating channel operation. Its internal deadtime helps reduce the possibility of simultaneous conduction of the two power switches.
The high-side output (HO) drives the upper MOSFET or IGBT, while the low-side output (LO) drives the lower switching device. The bootstrap circuit provides the floating supply required for high-side gate driving.
The IR2111 can be used in educational projects, industrial electronics prototypes, inverter development, and power supply repair applications. Proper PCB layout, gate resistors, bootstrap components, bypass capacitors, and voltage protection should be considered when designing a working circuit.
Important: The IR2111 is listed as an end-of-life/discontinued product by Infineon. Verify component authenticity, availability, and datasheet compatibility before purchasing. Its maximum 600V rating is a high-side offset voltage rating, not a recommendation to operate every circuit at 600V.
Technical Specifications:
|
Parameter |
Specification |
|---|---|
|
Part Number |
IR2111 |
|
Manufacturer |
Infineon Technologies / International Rectifier |
|
Component Type |
High Voltage Gate Driver IC |
|
Driver Configuration |
Half-Bridge |
|
Number of Drivers |
2 |
|
Number of Outputs |
2 |
|
Supported Devices |
Power MOSFET and IGBT |
|
High-Side Voltage |
600V Maximum |
|
Gate Drive Supply |
10V–20V |
|
Peak Source Current |
250mA (manufacturer product details) |
|
Peak Sink Current |
500mA (manufacturer product details) |
|
Typical Turn-On Delay |
750ns |
|
Typical Turn-Off Delay |
150ns |
|
Internal Deadtime |
650ns Typical |
|
Input Logic |
CMOS |
|
Protection |
Undervoltage Lockout |
|
High-Side Driver |
Floating / Bootstrap |
|
Package |
8-Pin PDIP / SOIC variants |
|
Mounting |
Through-Hole (PDIP) / SMD (SOIC) |
Source: Infineon official product information and datasheet. Note that source/sink figures vary by datasheet revision and specification conditions.
Key Features:
-
High-voltage 600V half-bridge gate driver.
-
Designed for power MOSFET and IGBT switching.
-
Independent high-side and low-side referenced outputs.
-
Bootstrap-compatible floating high-side channel.
-
10V to 20V gate drive supply range.
-
Internally set deadtime to help prevent shoot-through.
-
Undervoltage lockout for both channels.
-
CMOS-compatible logic input.
-
Matched propagation delay.
-
Suitable for inverter and switching power supply designs.
Applications:
-
Half-Bridge Inverter Circuits
-
Full-Bridge Power Electronics Designs
-
SMPS Power Supplies
-
DC-DC Converters
-
MOSFET Gate Driver Circuits
-
IGBT Gate Driver Circuits
-
Solar Inverter Projects
-
Motor Control Systems
-
Electronic Ballasts
-
Induction Heating Projects
-
High-Voltage Switching Circuits
-
Industrial Power Electronics
Pin Configuration:
|
Pin |
Name |
Function |
|---|---|---|
|
1 |
LO |
Low-side gate driver output |
|
2 |
COM |
Low-side reference / ground |
|
3 |
VCC |
Low-side driver supply |
|
4 |
IN |
Logic input |
|
5 |
VS |
High-side floating reference |
|
6 |
HO |
High-side gate driver output |
|
7 |
VB |
High-side floating supply |
|
8 |
NC |
No connection |