IRF520 MOSFET Driver Module 0–24V DC PWM Switching Board for Arduino, Raspberry Pi & Electronics Projects
The IRF520 MOSFET Driver Module is a compact electronic switching module designed to control DC-powered devices using digital signals from microcontrollers and development boards. Based on the IRF520 N-channel power MOSFET, this module allows Arduino, Raspberry Pi and other compatible controllers to switch external DC loads without directly supplying load current through their GPIO pins.
The IRF520 MOSFET driver board is commonly used for controlling DC motors, LED strips, DC fans, water pumps, solenoid valves, heating elements and other electronic loads. It supports PWM (Pulse Width Modulation) control, making it useful for applications that require adjustable motor speed, LED brightness and electronic power switching.
The module typically features a three-pin control interface with SIG, VCC and GND connections, along with screw terminals for connecting an external DC power supply and the load. Its onboard indicator LED provides a visual indication of the control signal. The screw terminals make installation and wiring convenient for electronics prototyping and DIY projects.
This MOSFET driver module is popular among electronics students, engineers, hobbyists and makers in Bangladesh who work with Arduino, ESP32, Raspberry Pi and other embedded development platforms. It can be integrated into robotics projects, automation systems, electronic experiments and DC load-control applications.
PWM-based switching allows users to control the average power delivered to a connected load by adjusting the duty cycle of the input signal. For example, PWM can be used to adjust the brightness of compatible DC LED loads or control the speed of suitable DC motors.
The IRF520 is rated for up to 100V drain-source voltage and 9.2A continuous drain current under specified datasheet conditions. However, these are the individual MOSFET's ratings, not guaranteed operating ratings for the complete driver module. Actual module performance depends on gate voltage, PCB design, connector capacity, cooling and operating conditions.
Product Specifications
|
Specification |
Details |
|---|---|
|
Product Name |
IRF520 MOSFET Driver Module |
|
Main Component |
IRF520 N-Channel MOSFET |
|
Module Type |
DC Load Switching Module |
|
MOSFET Type |
N-Channel Enhancement Mode |
|
Drain-Source Voltage |
100V (MOSFET rating) |
|
Continuous Drain Current |
9.2A (datasheet condition) |
|
Control Signal |
Digital / PWM |
|
Logic Input |
Commonly 3.3V–5V module interface |
|
Load Voltage |
Common module variants advertise 0–24V DC |
|
Switching Method |
Low-Side Switching |
|
Control Interface |
SIG, VCC, GND |
|
Load Connection |
Screw Terminals |
|
Indicator |
Onboard LED (variant dependent) |
|
Applications |
Motors, LED Strips, Fans, Pumps, Solenoids |
|
Compatibility |
Arduino, ESP32, Raspberry Pi and Microcontrollers |