Welcome to our store! প্রিয় সম্মানিত গ্রাহক, আমাদের সাথে থাকার জন্য ধন্যবাদ। ওয়েবসাইট আপডেটের কারণে কিছু পণ্য এখনো যুক্ত হয়নি। কাঙ্ক্ষিত পণ্য না পেলে বা তথ্য জানতে আমাদের মেসেজ করুন। 📱 WhatsApp: +8801812033544
IRL520N 100V 10A N-Channel Power MOSFET TO-220
IRL520N 100V 10A N-Channel Power MOSFET TO-220

IRL520N 100V 10A N-Channel Power MOSFET | TO-220 Switching & Power Control

0 out of 5 (0 reviews)
৳90.00
In Stock (40 available)

The IRL520N 100V 10A N-Channel Power MOSFET is a high-voltage N-channel enhancement-mode power transistor designed for switching and power-control applications. It is rated for up to 100V drain-to-source voltage and 10A continuous drain current under specified thermal conditions, making it suitable for a wide range of electronic projects, power circuits, motor control applications, load switching, inverters, and low-frequency switching designs. Infineon lists the IRL520N in a TO-220 package with a maximum power dissipation of 48W under specified conditions. 

The IRL520N is particularly useful for Bangladeshi electronics students, engineers, Arduino users, embedded developers, hobbyists, and technicians who need a through-hole power MOSFET for prototyping and repair work. Its standard TO-220 package makes it easy to mount on a PCB, breadboard adapter, or heatsink when thermal management is required.

This MOSFET can be used as an electronic switch to control loads such as DC motors, LED systems, solenoids, lamps, fans, relays, power converters, and other DC loads. The device has a maximum RDS(on) of 180mΩ at VGS = 10V, according to Infineon's product specifications.The IRL520N also has a ±16V maximum gate-to-source voltage and a specified junction-temperature range extending from −55°C to +175°C. Its power dissipation and current capability depend strongly on temperature, PCB layout, heatsinking, gate-drive voltage, switching frequency, and operating conditions. Therefore, the 10A figure should not be treated as a universal load-current rating without checking the datasheet conditions.

For Arduino and microcontroller projects, an important design consideration is the gate-drive voltage. Although the IRL520N is associated with logic-level applications, its published low RDS(on) specification is given at VGS = 10V, so designers should not assume that a 3.3V or 5V GPIO will always produce the lowest possible conduction loss. For higher-current applications, a suitable gate driver may be preferable.

The IRL520N is optimized for relatively low-frequency switching applications, with Infineon describing the device as suitable for switching below approximately 100kHz. Typical applications include DC motor control, inverters, SMPS circuits, lighting, load switches, and battery-powered applications. 

Important: Infineon currently identifies the IRL520N as an end-of-life/discontinued product, so availability and sourcing should be verified before using it in a new long-term production design.

Specifications:

SpecificationDetails
Part NumberIRL520N
MOSFET TypeN-Channel Power MOSFET
Drain-Source Voltage, VDS100V
Continuous Drain Current, ID10A @ specified conditions
RDS(on) Max180mΩ @ VGS = 10V
Gate-Source Voltage±16V maximum
Maximum Power Dissipation48W
Junction Temperature−55°C to +175°C
PackageTO-220
MountingThrough-Hole
Typical ApplicationsMotor Control, Inverter, SMPS, Load Switching, Lighting
Frequently Asked Questions

The IRL520N is a single N-channel power MOSFET designed for electronic switching and power-control applications. It is available in a TO-220 through-hole package.

The IRL520N has a maximum drain-to-source voltage of 100V.

The commonly specified continuous drain-current rating is 10A at the manufacturer's specified conditions. Actual operating current depends on temperature, heatsinking and other circuit conditions.

Yes, it can be used in Arduino projects for switching suitable loads. However, for low-voltage GPIO drive, verify the MOSFET's RDS(on) at the available gate voltage and consider a dedicated gate driver for higher-current applications.
Buy Now

Related Products