Welcome to our store! প্রিয় সম্মানিত গ্রাহক, আমাদের সাথে থাকার জন্য ধন্যবাদ। ওয়েবসাইট আপডেটের কারণে কিছু পণ্য এখনো যুক্ত হয়নি। কাঙ্ক্ষিত পণ্য না পেলে বা তথ্য জানতে আমাদের মেসেজ করুন। 📱 WhatsApp: +8801812033544
LM2596 constant current constant voltage CC CV 3A buck converter LED driver lithium-ion battery charging module
LM2596 constant current constant voltage CC CV 3A buck converter LED driver lithium-ion battery charging module

LM2596 CC/CV Buck Converter Module 3A Adjustable Constant Current/Voltage LED Driver & Li-Ion Battery Charger

0 out of 5 (0 reviews)
৳170.00
Wholesale Price Available ৳160.00 per unit on orders of 6+ pcs
In Stock (30 available)

The LM2596 Constant Current and Constant Voltage CC/CV LED Driver and Lithium-Ion Battery Charging Module is a compact adjustable DC-DC step-down power supply module designed for electronics projects that require controlled output voltage and current. Based on the LM2596 buck converter architecture, this module provides independently adjustable constant voltage CV and constant current CC regulation, making it useful for high-power LED driving, battery charging applications, DIY power supplies, robotics, solar projects, and laboratory electronics.

The module typically accepts a 7V to 35V DC input and provides an adjustable output voltage of approximately 1.25V to 30V, with an adjustable output current up to 3A depending on the particular module version, cooling, input/output conditions, and power dissipation. Common specifications for this board include approximately 150kHz switching frequency, up to about 92% conversion efficiency, and a compact PCB format.

The two blue multi-turn potentiometers allow users to adjust the output voltage and current. This CC/CV functionality makes the board particularly useful when a project needs both a controlled voltage limit and a controlled current limit. For example, it can be configured as a constant-current driver for suitable high-power LEDs or as a regulated DC source for electronics projects. It is also commonly used as part of a battery charging setup for lithium-ion batteries and other rechargeable battery packs.

For lithium-ion charging, the output voltage and current must be configured according to the exact battery chemistry, cell count, capacity, and manufacturer's charging requirements. This module should not be treated as a complete battery-management system or a replacement for a dedicated charger/BMS. Correct charging voltage, current, battery protection, cell balancing where applicable, and termination requirements must be considered separately.

As a non-isolated buck converter, the LM2596 module can only step voltage down and generally requires the input voltage to be sufficiently higher than the desired output voltage. Some versions specify a minimum input-to-output voltage difference of around 2V.

For Bangladeshi students, engineers, makers, Arduino users, robotics enthusiasts, and electronics technicians, this module is useful for experimenting with CC/CV power control, LED drivers, battery projects, solar power systems, embedded electronics, and adjustable DC supplies. Its screw terminals or solder pads make it easy to integrate into prototype circuits and custom power systems.

Important: At higher output current or power, adequate cooling is required. Published module specifications commonly recommend additional thermal management when operating near the upper current/power limits.


Specifications:

SpecificationDetails
IC / ControllerLM2596
Module TypeNon-isolated DC-DC Buck Converter
RegulationConstant Voltage CV + Constant Current CC
Input Voltage7V–35V DC
Adjustable Output Voltage1.25V–30V
Maximum Adjustable CurrentUp to 3A
Switching Frequency150kHz
EfficiencyUp to approximately 92%
Output RippleApproximately 50mV max, depending on conditions
Voltage RegulationApproximately ±2.5%
Load RegulationApproximately ±0.5%
CoolingAdditional heatsinking may be required at high power
ApplicationsLED Driver, Battery Charging, DC Power Supply
ConstructionCompact PCB module

Specifications can vary between board revisions and manufacturers, so verify the actual module version before designing around its maximum ratings.

Main Features:

  • Adjustable Constant Voltage CV
  • Adjustable Constant Current CC
  • LM2596-based step-down converter
  • Input voltage around 7V–35V DC
  • Adjustable output voltage around 1.25V–30V
  • Current adjustment up to 3A
  • Suitable for high-power LED applications
  • Useful for rechargeable battery projects
  • Compact PCB design
  • 150kHz switching operation
  • High efficiency for a small buck converter
  • Useful for Arduino, robotics and DIY electronics projects

Applications:

  • High-power LED constant-current driver
  • Li-ion battery charging projects
  • Adjustable DC power supply
  • Arduino and microcontroller projects
  • Robotics power systems
  • Solar panel power regulation
  • DIY laboratory power supplies
  • Electronics prototyping
  • Battery-powered projects
  • LED lighting projects
Frequently Asked Questions

It is an adjustable non-isolated buck converter module that can regulate both constant output voltage and constant output current.

A common version of this module supports approximately 7V to 35V DC input. Specifications can vary by board revision.

Common versions provide an adjustable output from approximately 1.25V to 30V.

Many versions advertise an adjustable maximum output current of approximately 3A, but continuous operation near the maximum requires appropriate thermal management.

It can be used as the CC/CV regulation stage in a suitable battery-charging setup, but the voltage and current must be correctly configured for the battery. A bare LM2596 module does not replace a complete battery-management/protection system.
Buy Now

Related Products