Welcome to our store! প্রিয় সম্মানিত গ্রাহক, আমাদের সাথে থাকার জন্য ধন্যবাদ। ওয়েবসাইট আপডেটের কারণে কিছু পণ্য এখনো যুক্ত হয়নি। কাঙ্ক্ষিত পণ্য না পেলে বা তথ্য জানতে আমাদের মেসেজ করুন। 📱 WhatsApp: +8801812033544
PZEM-004T 100A AC power energy monitoring module with CT coil
PZEM-004T 100A AC power energy monitoring module with CT coil Image 2

PZEM-004T 100A AC Energy Meter Module, 80–260V Single-Phase Power Monitor with CT Coil for Arduino & ESP32

0 out of 5 (0 reviews)
৳1,280.00
In Stock (5 available)

The Peacefair PZEM-004T 100A AC Energy Meter Module is a compact single-phase AC power monitoring module designed for measuring and communicating electrical parameters in electronic projects, energy-monitoring systems and smart-home applications. The 100A version uses an external current transformer, allowing current measurement without routing the full load current directly through the measurement PCB. The module shown includes the enclosed Peacefair meter board and CT coil.

PZEM-004T can measure AC voltage, current, active power, accumulated energy, frequency and power factor, making it useful for both basic electrical monitoring and microcontroller-based energy management projects. The commonly documented measurement range is 80–260V AC, with the 100A version supporting up to 0–100A current and approximately 0–23kW active power, depending on the applicable version and operating conditions.

The module provides serial communication through a TTL interface and supported versions use a Modbus-RTU communication protocol. This makes the PZEM-004T suitable for integration with development platforms such as Arduino, ESP8266, ESP32 and other microcontrollers. Open-source libraries are also available for Arduino and ESP-based projects.

For energy-monitoring applications, the module can provide accumulated energy readings up to 9999.99kWh, while frequency measurement is typically specified from 45Hz to 65Hz and power factor from 0.00 to 1.00.

The external CT design is particularly useful for monitoring higher-current loads because the CT can sense current through the conductor while the measurement electronics remain separate from the high-current path. This makes the PZEM-004T 100A a practical choice for home energy monitoring, smart electricity meters, IoT power monitoring, solar and inverter projects, laboratory experiments, electrical equipment monitoring and automation systems.

For Bangladeshi electronics students, engineers, technicians and IoT developers, this module can be used to build real-time electricity monitoring systems with an Arduino or ESP32, display measurements on an LCD/OLED, or send power-consumption data to a local web dashboard or IoT platform.

Important: This module works with potentially hazardous mains AC. Proper electrical isolation, enclosure, wiring, fusing and qualified installation practices are essential. The exact communication protocol, accuracy and wiring should be checked against the specific PZEM-004T revision supplied with the product.


Specifications:

SpecificationDetails
Product ModelPZEM-004T 100A
BrandPeacefair
Product TypeAC Energy Meter / Power Monitoring Module
AC Voltage Range80–260V AC
Current Range0–100A
Current SensingExternal CT
Active PowerUp to approximately 23kW
Frequency45–65Hz
Power Factor0.00–1.00
Energy MeasurementUp to 9999.99kWh
Voltage Resolution0.1V
Current Resolution0.001A
Power Resolution0.1W
CommunicationTTL Serial
ProtocolModbus-RTU on supported versions
ApplicationArduino, ESP32, ESP8266, IoT & Smart Home
Measurement SystemSingle-phase AC

Specifications above are based on documented PZEM-004T specifications; revisions can differ, so verify the exact version before installation.

Main Features:

  • 100A AC current measurement using external CT
  • 80–260V AC voltage measurement
  • Active power measurement
  • Cumulative energy measurement
  • AC frequency measurement
  • Power factor measurement
  • TTL serial communication
  • Modbus-RTU support on compatible revisions
  • Suitable for Arduino and ESP32 projects
  • Compact enclosed design
  • Useful for IoT and smart-home energy monitoring

Applications:

  • Home electricity monitoring
  • Smart energy meter projects
  • Arduino power monitoring
  • ESP32 energy monitoring
  • IoT electricity monitoring
  • Solar and inverter monitoring
  • AC appliance power measurement
  • Electrical load monitoring
  • Smart home automation
  • Laboratory and engineering projects
  • Energy consumption data logging
Frequently Asked Questions

The PZEM-004T 100A is a single-phase AC electrical measurement module designed to measure voltage, current, active power, energy, frequency and power factor.

Yes. The 100A version is designed for current measurement up to 100A using an external current transformer.

The commonly specified AC voltage measurement range is 80–260V AC.

Yes. It provides accumulated active-energy measurement, commonly specified up to 9999.99kWh.

Yes. The module measures power factor, commonly across a 0.00–1.00 range.

The 100A model uses an external CT for current sensing, but the module still interfaces with hazardous mains voltage. Installation should use appropriate insulation, enclosure, protection and electrical safety practices.
Buy Now

Related Products