TP5100 2A Fast Charging Lithium Ion Battery Charger Module | 1S/2S Li-ion Battery Charging Board
The TP5100 2A Lithium Ion Battery Charger Module is a popular charging solution for DIY battery-powered electronics projects. Based on the TP5100 charging IC, this module is designed to provide a charging current of up to 2A and can support single-cell 1S or two-cell 2S lithium battery configurations, depending on the module's configuration.
For 1S lithium-ion batteries, the charging voltage is typically 4.2V, while the 2S configuration uses an approximately 8.4V charging voltage. This makes the module suitable for a wide range of applications including portable electronics, robotics, Arduino projects, ESP32 projects, LED systems, wireless devices, battery-powered instruments, and custom power solutions.
Its small PCB footprint makes the TP5100 module easy to integrate into compact electronic projects. Students and engineers can use it when designing rechargeable battery systems where a higher charging current is required.
Why use TP5100?
The TP5100 is particularly useful when you need a higher charging current than common 1A lithium battery charger modules. A charging current of up to 2A can significantly reduce charging time when the battery and power source are appropriately rated.
The module is therefore a practical choice for DIY lithium-ion battery chargers, robotics projects, portable power supplies, IoT devices, and rechargeable electronics.
Features:
- TP5100 lithium battery charging IC
- Charging current up to 2A
- Supports 1S and 2S lithium battery configurations
- Approximately 4.2V charging voltage for 1S
- Approximately 8.4V charging voltage for 2S
- Compact PCB design
- Suitable for DIY electronics projects
- Useful for robotics and embedded systems
- Suitable for rechargeable battery applications
- High-current charging compared with many basic 1A charger boards
- Easy to integrate into custom battery-powered projects
Specifications:
| Specification | Details |
|---|---|
| Module Type | Lithium-ion Battery Charger Module |
| Charging IC | TP5100 |
| Maximum Charging Current | Up to 2A |
| Battery Configuration | 1S / 2S |
| 1S Charging Voltage | 4.2V |
| 2S Charging Voltage | 8.4V |
| Battery Chemistry | Li-ion / LiPo* |
| Input | DC power source |
| Charging Method | Constant Current / Constant Voltage |
| PCB Type | Compact Charger Module |
| Application | DIY, Robotics, IoT, Portable Electronics |
| Charging Current | Configurable depending on board design |
| Protection | Depends on the specific module |