Welcome to our store! প্রিয় সম্মানিত গ্রাহক, আমাদের সাথে থাকার জন্য ধন্যবাদ। ওয়েবসাইট আপডেটের কারণে কিছু পণ্য এখনো যুক্ত হয়নি। কাঙ্ক্ষিত পণ্য না পেলে বা তথ্য জানতে আমাদের মেসেজ করুন। 📱 WhatsApp: +8801812033544
XH-M609 DC 12-36V battery low voltage disconnect protection module
XH-M609 DC 12-36V battery low voltage disconnect protection module

XH-M609 Battery Low Voltage Disconnect Protection Module 12-36V DC | Digital Over-Discharge Protection for Batteries

0 out of 5 (0 reviews)
৳325.00
In Stock (10 available)

The XH-M609 DC 12-36V Battery Low Voltage Disconnect Protection Module is a compact digital battery protection controller designed to help prevent excessive battery discharge. It monitors the battery voltage and automatically disconnects the connected load when the voltage reaches a configured low-voltage cutoff level. This makes the XH-M609 useful for protecting batteries used in solar power systems, backup power supplies, DC equipment, battery-powered projects, automotive electronics, and DIY electronics.

The module supports 12V to 36V DC battery systems and provides voltage monitoring with approximately 0.1V control/display precision. Its integrated digital LED display allows users to monitor the measured voltage and configure the protection parameters. The module uses an onboard control interface for setting the low-voltage disconnect and recovery levels.

When the battery voltage falls below the selected cutoff threshold, the XH-M609 switches off the load to reduce the risk of deep discharge. When the battery voltage subsequently recovers to the configured restart level, the module can reconnect the load. The separation between disconnect and reconnect voltage helps prevent rapid relay switching when the battery voltage fluctuates around the cutoff point.

The XH-M609 battery low voltage disconnect module is particularly useful for electronics students, engineers, technicians, makers, and hobbyists working with 12V, 24V, and 36V battery-powered systems. It can be incorporated into solar battery projects, DC lighting systems, battery backup equipment, small inverter systems, electronic test setups, and other applications where automatic low-voltage load protection is required.

The module's output is designed to pass the battery/system voltage through its switching circuit rather than convert the voltage to another level. Typical published specifications list power consumption below 1.5W, dimensions around 57 × 42 × 19mm, and a net weight of approximately 28g.

For Bangladeshi electronics students and engineers, the XH-M609 can be a practical module for experimenting with battery management, undervoltage protection, DC load control, solar energy projects, and automatic battery cutoff circuits. Before connecting a high-current load, verify the actual relay/contact rating of your specific module and use an appropriately rated external relay, contactor, fuse, or MOSFET stage where necessary. Published versions of the XH-M609 show different relay ratings, so the rating should not be assumed solely from the model number.

Features:

  • Model: XH-M609
  • Operating voltage: DC 12V to 36V
  • Low-voltage disconnect: Adjustable
  • Voltage control precision: Approximately 0.1V
  • Digital LED voltage display
  • Automatic load disconnect
  • Automatic load recovery
  • Designed for battery over-discharge protection
  • Compact PCB design
  • Suitable for various battery and lithium battery applications
  • Low power consumption, typically below 1.5W
  • Approximate size: 57 × 42 × 19mm

Specifications

SpecificationDetails
ModelXH-M609
Product TypeBattery Low Voltage Disconnect Module
Input VoltageDC 12V-36V
Output VoltageSame as supply voltage through switching circuit
Control Precision0.1V
DisplayDigital LED display
Power Consumption<1.5W
ProtectionLow-voltage / over-discharge protection
Battery ApplicationLead-acid, lithium and other compatible batteries
DimensionsApprox. 57 × 42 × 19mm
WeightApprox. 28g
ApplicationBattery, solar, DC load and power projects

Specifications can vary between XH-M609 versions, particularly relay/current ratings, so verify the markings or datasheet of the exact board before designing a high-current application. 

Frequently Asked Questions

The XH-M609 is a digital battery low-voltage disconnect and over-discharge protection module designed for DC battery systems, commonly specified for 12V to 36V operation.

The commonly published operating range is 12V to 36V DC. Some online listings describe wider ranges, but the standard 12-36V specification should be used unless the exact board documentation confirms otherwise.

When the battery reaches the configured low-voltage cutoff point, the module disconnects the load to help prevent excessive battery discharge.

Yes. The module supports a recovery threshold, allowing the load to reconnect when the battery voltage rises sufficiently above the configured cutoff level.

Yes. Common XH-M609 boards use an LED digital display for monitoring voltage and configuring protection parameters.
Buy Now

Related Products