NRF24L01 2.4GHz Wireless Transceiver Module

Modules

NRF24L01 2.4GHz Wireless Transceiver Module

0 out of 5 (0 reviews)

৳140.00

In Stock (30 available)

NRF24L01 2.4GHz Wireless Transceiver Module

The NRF24L01 2.4GHz Wireless Transceiver Module is a high-performance wireless communication module designed for long-range, low-power data transmission. Equipped with a Power Amplifier (PA) and Low Noise Amplifier (LNA) along with an external SMA antenna, this module provides significantly greater communication distance than the standard NRF24L01 module.

It operates in the license-free 2.4GHz ISM band and communicates through the SPI interface, making it compatible with Arduino Uno, Nano, Mega, ESP8266, ESP32, STM32, Raspberry Pi, PIC, AVR, and many other microcontrollers.

Whether you are building IoT devices, smart agriculture systems, home automation, robotics, industrial monitoring, wireless sensor networks, drone communication, or remote control systems, this module delivers reliable and stable wireless connectivity with very low power consumption.

Its built-in Enhanced ShockBurst™ protocol, automatic packet handling, CRC error detection, and multiple communication channels help ensure dependable wireless communication even in environments with signal interference.

For Bangladeshi students, robotics enthusiasts, embedded engineers, and IoT developers, the NRF24L01 PA+LNA module is an affordable and highly reliable wireless communication solution.

Features:

High-performance 2.4GHz RF transceiver
External SMA antenna for extended range
Built-in Power Amplifier (PA)
Built-in Low Noise Amplifier (LNA)
SPI communication interface
Ultra-low power consumption
Supports bidirectional communication
Automatic packet acknowledgment
CRC error detection
Multi-channel operation
Supports up to 2Mbps data rate
Compatible with Arduino, ESP32, STM32, Raspberry Pi
Ideal for IoT and robotics applications

Specifications:

Chipset: NRF24L01
Operating Frequency: 2.4GHz ISM band
Modulation: GFSK (Gaussian Frequency Shift Keying)
Communication Protocol: Enhanced ShockBurst (ESB)
Operating Voltage: 1.9~3.6V recommended 3.3V (5V tolerant I/O pins) (dont use Arduino 3.3v pin for power it up)
Communication Range: Varies depending on power settings and environmental factors, but can typically reach up to 100 meters in open space.
Data Rate: Adjustable data rates, commonly used rates include 250kbps, 1Mbps, and 2Mbps.
DIP-8 ultra small package, built-in 2.4G antenna
Supports six channels of data reception
Supports general modulation methods such as GFSK/FSK
Average emission current as low as 110mA
Receive sensitivity: -96dBm@250kbps
Maximum transmit power: +7dBm
4-wire SPI interface with speeds up to 10MHz
Internal integrated intelligent ARQ baseband protocol engine
Transceiver data hardware interrupt output
Support 1bit RSSI output
Output Power: Adjustable power levels for different communication ranges.
Interface: SPI (Serial Peripheral Interface) for communication with microcontrollers or other devices.
Operating Temperature Range: -20°C to +70°C.
Size: 15x28mm.

Package Includes:

1 × NRF24L01 Wireless Module

Applications:

IoT Projects
Robotics
Smart Agriculture
Smart Home Automation
Industrial Monitoring
Wireless Sensor Networks
Drone Communication
RC Projects
Remote Data Logging
Embedded Systems
Arduino Projects
ESP32 Wireless Communication
Raspberry Pi RF Projects

Compatibility:

Works perfectly with:

Arduino Uno
Arduino Nano
Arduino Mega
ESP8266
ESP32
STM32
Raspberry Pi
PIC Microcontroller
AVR
ARM Cortex Boards

Frequently Asked Questions

The NRF24L01 module is used for wireless communication between microcontrollers in IoT, robotics, automation, remote monitoring, and sensor network projects.