2S 18650 Battery Holder for 2 × 18650 Lithium-Ion Batteries
The 2S 18650 Battery Holder is a practical battery mounting solution designed to hold two 18650 lithium-ion cells in series for DIY electronics, portable power supplies, and battery-powered projects. It helps keep batteries securely positioned while providing accessible electrical connections for integrating a battery pack into an electronic circuit.
This 2-cell 18650 battery holder is suitable for electronics students, engineers, hobbyists, and makers in Bangladesh who are developing portable devices, embedded systems, robotics projects, sensor nodes, and other battery-powered applications. It can be used with compatible battery protection circuits, voltage regulators, DC-DC converters, and charging modules to build a suitable power system.
When two compatible 18650 cells are connected in series, their voltages add together. With typical 3.6V or 3.7V nominal lithium-ion cells, a 2S battery configuration provides approximately 7.2V to 7.4V nominal voltage and reaches 8.4V when fully charged, assuming standard 4.2V-per-cell charging limits. The actual voltage depends on the cells and their state of charge.
The holder makes it easier to install, remove, and replace batteries compared with permanently soldering cells into a project. It is useful for prototyping, educational experiments, portable LED systems, Arduino and ESP32 projects that use a suitable voltage regulator, robotics, and low-voltage electronic equipment.
Before purchasing, check the holder's physical dimensions, terminal arrangement, wire or connector type, and intended series configuration. A holder designed for two cells does not automatically guarantee a 2S series connection, so verify the wiring and output voltage. If a 2S configuration is required, confirm that the holder connects the cells in series rather than parallel.
For safe operation, use compatible 18650 cells with appropriate current ratings and similar specifications. A suitable 2S battery management system (BMS) should be used where protection against overcharge, over-discharge, and excessive current is required. Use a charger specifically designed for a 2S lithium-ion battery pack with the correct charging voltage. Never assume that a battery holder itself provides charging or protection functions.
Whether you are building a portable electronics prototype, a robotics power source, or a custom battery-powered device, the 2S 18650 battery holder offers a convenient way to mount two cylindrical lithium-ion cells in your project.
Specifications:
Specification | Details |
|---|---|
Product Type | 18650 Battery Holder |
Battery Capacity | 2 × 18650 cells |
Battery Configuration | Verify series or parallel wiring |
Battery Type | Compatible 18650 lithium-ion cells |
Nominal Voltage | 7.2V–7.4V for a 2S configuration |
Fully Charged Voltage | 8.4V for standard 4.2V-per-cell lithium-ion cells |
Installation | Removable battery mounting |
Output Connection | Depends on holder variant |
Applications | DIY electronics, robotics, portable power |